PVEG Pinch valves

  • Flowrox PVEG pinch valves, low cost, lightweight design, shut off valve for abrasive media.
  • Non-metallic construction ideal for aggressive environments.
  • Manual and actuated designs for pump, tank, pipeline and plant isolation.
  • Chemical resistant Polyamide body simple design.
  • Standard ANSI flange to flange dimension for easy replacement and retro-fitting of problem valves.
  • Manual < 10bar pressure, pneumatic actuated < 6bar,
  • ANSI150 or DIN PN10 flange drilling
  • Styrene Butadiene (SBRT) or chemical resistant EPDM sleeve.
  • For abrasive slurry, contaminated effluent, abrasive media, powders granular media, water and wastewater.


 PVEG M(manual) Pinch valves

  • Wear resistant,
  • Up to 10bar working pressure,
  • Lightweight,
  • Styrene Butadene or EPDM sleeves,
  • Non Clogging, 100% full bore when open,
  • Simple Design



PVEG A(automatic) Pinch valves


  • Pneumatic actuated,
  • Up to 6bar working pressure,
  • Styrene Butadene or EPDM sleeves,
  • Actuator Air Supply,
  • Required minimum 6bar.



 To select the best product for your application please note the following:-

  • This is an isolation valve, it is not a control valve.
  • What size of valve is required, what flange drilling detail do you need, if automatic type is required, do you need position limit switches.
  • What is the maximum pressure  going through the valve. What is the fluid or media in the system, tell us everything, temperature, chemical composition, solids present.